Durability Test
Vehicle Refrigerant Compressor
Durability Tester
(Water Cooled Type)
- Vehicle refrigerant compressor durability test
- Condenser water-cooled exchange system
- Controls all functions from software
- Compressor Speed,Discharger,Clutch Voltage
- Supports a calibration Mode (S/W)
- R134a, R744, R1234yf A/C System
Feature
- Test room - Main Chamber
- Cooling water cooling system
- Compressor Drive system
- Condenser (Water Cooled)
- Evaperator (Blower system)
- Water Cooled Valve Controller
- R134a, R744, R1234yf A/C System
- Indicator - Controller, Counter, Timer & Indicator
- Instrumentation - Sensor & Converter
- DAS- Compact RIO & Labview S/W
Specifications
MODEL | SEOUL-CDT-W-8848-2 Series |
---|---|
System | Velt Driving system & Condenser Waater Cooled |
Compressed RPM | 12,000 RPM |
Safety Device | Heater E.O.C.R, SCR over current, Pressure H.P S/W High temperature : High Limit cut off |
Pressure Range | Discharge : 0.6 ~ 3.5 MPa Suction : -0.1 ~ 1.5 MPa |
Comp Room Temperature | 35 ~150℃ |
HVAC Blower | DC 0~20V, 0~60A |
Evapotator Temp | RT ~ 70℃ |
Clutch Power | DC 0~30V, 0~33A |
Cooled System | Chiler Water & Control Valve |
Pressure Transducer | High Pressure : 0 ~ 4 MPa ±0.75% FS Low Pressure : -0.1 ~ 2 MPa ±0.75% FS |
Temperature Sensor | -50 ~ 150℃ (TC T-type, Diameter:1/8" STS sheath) |
Construction
Material | Rolled Acrylic & Stainless & Aluminum |
---|---|
Sizing | W2200 x D1400 x H1850 |
Control
Control | Manual / Full Automatic |
---|---|
Control Interface | LabVIEW SoftWare With PC Interface |